mixer
mixer
You are here: Home » Mixer blog » What are the Points of Attention for Operating High Speed Mixers?

What are the Points of Attention for Operating High Speed Mixers?

The high speed mixer mainframe is an extruder consisting of an extrusion system, a transmission system and a heating and cooling system. The high-speed mixer extruder extrusion system includes a screw, a barrel, a hopper, a machine head, and a mold. The plastic is plasticized into a uniform melt through an extrusion system, and is continuously continuous by the screw under the pressure established in the process. The extruder head. The function of the high-speed mixer extruder is to drive the screw, which supplies the torque and speed required by the screw during the extrusion process, usually consisting of a motor, a reducer and a bearing. High-speed mixer extruders are essential for plastic extrusion processes.Qinfeng Machinery is a Manufacturer and Supplier in China.

High Speed Mixer
In many cases, mechanical failures are caused by operation. Therefore, the correct operation of the high-speed mixer has the advantage of prolonging its life. However, the use of high-speed mixers does not receive enough attention in our daily life, and it also causes some Unnecessary problems, then we should pay attention to those problems when using high-speed mixers?
In the event of a malfunction or abnormal situation, the person concerned must be reported and handled by a qualified service technician. If it is found that there is an abnormal phenomenon affecting safety, immediately press the emergency stop switch. Do not use low-quality materials with metal impurities or sediment. Do not place metal objects that may fall into the vicinity of the feed port to prevent the screw or barrel from being worn or jammed or damaged. High-speed mixer operation should use the hydraulic oil with the cleanliness, viscosity and other indicators to meet the requirements, and provide sufficient cooling water for the oil cooler according to regulations, so as to avoid hydraulic components and pipelines from clogging or oil leakage due to oil pollution or high temperature. And so on. The extruder should be filled with the required lubricant. High-speed mixers must be operated in strict accordance with the operating procedures, and must not be operated in violation of non-operational stations. To ensure the reliability of the safety device, the safety protection measures of the machine must not be destroyed for efficiency. When the high-speed mixer is operated, the material temperature does not reach the set temperature, and when the holding time is insufficient, the screw is not required to be turned on. Operated by operators who are trained and familiar with the structural performance and operating procedures of high speed mixers.

Category: Mixer blog,Mixer Q & A

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact us
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com

Leave a Reply

Your email address will not be published. Required fields are marked *