MixerOther Mixer
You are here: Home » Mixer » V Type Mixing Mixer
Product description

V Type Mixing Mixer Overview:
The factory introduced a new technology to absorb and digest foreign countries and developed a V type mixing mixer. The V type agitating mixer can mix finer particles, clots or more than two kinds of powders, and materials containing a certain amount of water can be mixed. The V type mixing mixer can also achieve a mixing effect on a small amount of additives (refer to mixing of ingredients with a small amount added).

V Type Mixing Mixer

Equipment production technology:
1. The mixer barrel of the V type mixing mixer is two asymmetrical cylinders. The material is a high-quality stainless steel plate. The two ends of the V-type mixing cylinder adopt an elliptical head, on both ends. The feed inlets are all arranged to facilitate the cleaning of the cylinder after the materials are mixed. Both the inner and outer walls are precision-polished and polished, with a smooth surface, no dead angles, thorough discharge and easy cleaning.
2. The transmission shaft consists of a transmission half shaft. Before installation, the shaft sleeve is fixed and welded on the cylinder wall with a concentric rod. There is a δ8.0 mm plate reinforcement. After the completion, the concentric rod is removed and the shaft hole is closely welded with no leakage. In the process of drum transmission, there is no jitter and no eccentricity.
3. The transmission system of V type mixing mixer is composed of motor, reducer, sprocket, bearing, drive shaft and other parts. The rotation speed of the barrel is 8 to 10 rpm, and there is no noise during operation, and the operation is stable.
4. The rack is made of channel steel. The welded rack is made of 3042Bδ1.0mm stainless steel. The surface is smooth, no scratches, and no welding traces. The side of the electrical support controlled by the rotating bracket is a movable door, which is easy to maintain.
5. The stainless steel sealing butterfly valve is installed at the discharge port of the cylinder, which has good sealing effect and convenient operation.
6. The feed inlet of the V type mixing mixer is a movable cover plate, which is pressed by a lever and sealed with a food-resisting silicone rubber seal. It is pollution-free and easy to operate. Both the discharge and the feed inlet can open the cleaning equipment.
7. Control mode: manual control.
8. The mixing time can also be manually set. The V type mixing mixer adopts digital display time relay control. The mixing time is set according to the requirements of the actual production process mixed, which reduces the labor intensity and improves the production efficiency. Feeding and discharging the material adopts the jog button to move the V-shaped cylinder to the proper loading (or discharging) position, and enters and exits the material.

Technical parameter
Video Show
Related products
Contact us

Leave a Reply

Your email address will not be published. Required fields are marked *

Zhangjiagang Qinfeng Machinery Co.,Ltd
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com
Contact us
Tel: +86-512-58200823
Fax: +86-512-58200820
Mobile: +86-13951133895
ADD: NO.358,Jiangjin road zhangjiagang city,Jiangsu province,China.
E-mail: sales@qinfengmachine.com / 468921@qq.com

Leave a Reply

Your email address will not be published. Required fields are marked *